Thank you. You have rated this product.
SIX pistons vs. the Club Model's Brembo 4 pistons, PLUS a lower price tag, even lower weight for better ride quality, and better replacement costs! Fits over your factory 11" front rotors! Better wheel clearance than factory AND Brembo calipers.
MAXIMUM rigidity and larger pad area from this 6-piston caliper for improved braking response over the standard single piston OEM brake calipers, reduced unsprung mass, wider pad selection, better looks and MORE FUN.
Not all fancy brake calipers are the same, piston size, pad size, and more all affect performance and longevity. Our caliper choice was made with great care to retain the superb braking balance.
Utilizes a Wilwood 6 piston caliper that is 3 lbs lighter than the factory caliper per corner (including brake pads). Despite more pistons this is still lighter than the factory Brembo caliper.
Our kit uses our own brackets designed in-house, CNC machined from the highest grade aluminum with steel thread inserts. These brackets are designed for superior strength and rigidity and feature our signature hard anodizing.
Our stainless steel braided lines are included as standard and they are the most durable and heavy duty lines on the market, custom made for us and featuring DOT fittings. Too many competitors use general purpose lines to save cost and include lots of extra connectors to 'make it work' with the unnecessary risk of fluid leaks.
Upgrading your ND with our caliper package gives you access to the wide and familiar selection of performance brake pads that we have decades of experience with! Replacement pad costs for these calipers are also far more affordable than for the factory calipers. Kit includes BP20 pads which are great for street/light performance use and match very well with factory pads in the rear. If you would like to swap to a different pad for more aggressive use, just shoot us an email!
Comprehensive kit includes:
* Dynapro 6 piston calipers
* Mounting Brackets
* Stainless Steel brake lines
* All mounting hardware
* BP20 Street Performance Brake pads
* Wilwood high-temp brake fluid
Better wheel clearance than the factory Brembos! YES you can fit a 15" wheel at the FRONT over this kit (which you cannot do with stock brakes). Fits all aftermarket 16" and 17" wheels that we sell here. Fits factory 17" BBS wheels with no spacer (those are made to clear multi piston optional Brembo calipers) and fits standard factory 17x7 wheels with slim 3mm spacer we include in the kit.
BRIAN's APPLICATION NOTES: From the picture below you can quickly see that Mazda believes that a caliper upgrade on this platform includes BIGGER pads with the optional Brembo pad at 8.1 square inches versus the standard front OEM at 6.2 inch area pads. We agree with Mazda that size does matter here, which is why we go bigger than stock with both our four and six piston choices! Our four piston choice is 6.4 square inches vs 6.2 for stock pads, and our Six Piston upgrade with 7.3 square inches is nearly 20% more area than stock pads and the best aftermarket analogy for what Mazda does with the Brembo option. More performance comes with bigger pads and pad life is also dependent on pad size. We include the tiny Powerlite Caliper pad at the top of the picture below because we are aware a competitor offers that little caliper as their 'upgrade' and we think you should see up front how that caliper's pad size is nearly 20% smaller than even standard factory ND front pads, and dwarfed by the pad size Mazda offers in the Brembo Calipers. So if you want the best aftermarket four piston conversion, it is our kit. And if you want to best match what the factory offers with the BIG BREMBO option see our SIX PISTON Caliper conversions.
Six Piston setup shown in RED below with our 16x8 Enkei RP-F1 wheels, and our Konig 17x7.5 Runlite in the bottom picture. As you can see, the 6 piston nicely fills the 16 inch wheels and doesn't get lost in the 17 inch.