Flow Force 550cc Plug-and-play NC Injectors

DESCRIPTION

If you are looking for superior idle quality but you do not need monster 1000cc injectors for your project, look no further!

These high performance, high capacity, long body EV14 injectors are plug and play for the 2006-2015 Mazda Miata (NC)

Cutting edge Bosch EV14 technology

Flow matched within +/-1% static and dynamic (2ms pulse, idle conditions) flow rates for a smooth idle

Multi-hole tip for superb atomization

Works with multiple fuel types, including E85

Plug and Play for NC miatas
NOTE: "Plug and Play" means these plug right in to the factory fuel injector connectors, no wiring needed. This does NOT mean you can just run them on the factory ECU tune. You MUST re-tune for larger injectors.
These EV14 injectors are the go-to choice for high performance naturally aspirated builds, low pressure e85 forced induction, or moderate pump gas builds. Thanks to our tight flow matching at 2ms pulse width, they will support 300whp on pump gas, and still idle beautifully.

Kit Includes:

4x 550cc (at 3 bar) Flow Matched EV14 Injectors
1x dielectric grease
Bosch Type IV Fuel Injector Info:

This is a high performance, high volume fuel injector. Fuel delivery is from a multi-hole disc which incorporates a dual cone-shape spray pattern for maximum fuel atomization for modern single-valve and multi-valve engines. These injectors will function at fuel rail pressures of up to 7 bar.

Length: 60mm O-ring to O-ring
Diameter: 14 mm
Resistance: 14.5 Ohms (high resistance)
Electrical connector type: USCAR, EV6