Hi Brian,
The rules for the new proposed STR class have been released, and i'm sure it will be very popular with NC owners. With that in mind, what would your wheel recommendation be for an STR NC? The rules are 255 tires and 9" max wheels.
What offset would be ideal? I've read that the 17x9 +45 rpf1 can rub on the inside if used with 255 tires, but at the same time it doesn't seem like there is much more room to lower the offset without pulling the fender. Your experience would be much appreciated!
http://scca.com/documents/Fastrack/09/0 ... g-solo.pdf
Wheels for STR NC
With posting of the rules we sold most every set we had today of 45mm 17x9 RP-F1..... I expect we will be sold out within 3 days. And Enkei won't have more until at least September.
I can't imagine much issue with inside rub with that combo given that we run 285s at 45mm offset on 18x9.5 with the same 45mm offset on our SSM 07 NC.
I can't imagine much issue with inside rub with that combo given that we run 285s at 45mm offset on 18x9.5 with the same 45mm offset on our SSM 07 NC.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Do you want to win or just show up?
+43: 5Zigen FN01-RC...Heavier is slower...this is an 18.5 pound wheel
+46: Konig Runaway (only 8" though)...8 inch won't be competitive....at all.
+49: Weds TC-105N----double the cost for the same weight and might rub with 255 to the inside.
+43: 5Zigen FN01-RC...Heavier is slower...this is an 18.5 pound wheel
+46: Konig Runaway (only 8" though)...8 inch won't be competitive....at all.
+49: Weds TC-105N----double the cost for the same weight and might rub with 255 to the inside.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com