Miata 1990-2005: Exhaust : Catalytic-Converter

RoadsterSport High Performance Miata Catalytic Converter-CALIORNIA VERSION : 94-95

RoadsterSport High Performance replacement catalyst for your Miata at one third of the cost of the smaller diameter dealer units.

YES, CARB Exempt for OBDII (CARB 36105).

YES, includes gaskets and hardware needed for installation in your Miata!

Yes, bolt holes are slotted so you can squeeze this 2.5 inch diameter unit into the factory space... but it has the flow for use with any of our performance Miata exhausts from RoadsterSport to Racing Beat, Borla, etc.

Customers who bought RoadsterSport High Performance Miata Catalytic Converter-CALIORNIA VERSION : 94-95 also often bought:
	Racing Beat Standard Miata Connecting Pipe::90-95 A Power Pulse Miata Connecting Pipe is required with any Power Pulse Miata muffler assemblies for proper fitment on 90-97 Miatas!! The Racing Beat Power Pulse Miata Connecting Pipe is constructed with 2.375-inch OD (60mm), stainless steel tubing with... More Info
	Racing Beat Power Pulse Miata Exhaust -- SALE::90-97 Designed and manufactured by Racing Beat, this 2.375" OD Straight-Flow Miata muffler is intended for all 1990-97 Miatas. The heart of the Power Pulse Miata Exhaust System is this 304 polished stainless steel muffler canister which must be matched with... More Info
	Helium 15x6.5 Bronze--40mm offset-- A Miata wheel best seller for many years and the reason is easy to see, a classic design that looks great on any Miata and a very light weight for the price, just 11.4 pounds! This is our favorite street Miata wheel in terms of lightness for the price... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton