Miata 1990-2005: Brakes : Pads

Wilwood Q Compound Miata BIG brake kit Pads (four piston)

Brake pads to fit our brake kit. Q compound pads are true low dust pads. They are quiet, long lasting ceramic based pads with good friction and heat range. Only fits our Big Brake Kit. These are not a high bite pad. See our BP-10 Smart pads for more bite in a low dust pad for our BIG BRAKE KIT.

Customers who bought Wilwood Q Compound Miata BIG brake kit Pads (four piston) also often bought:
	Wilwood clips The calipers come with single use cotter pins. We sell these reusable retaining clips for wilwood calipers to replace the cotter pin. Price is for two pins. More Info
	Porterfield R4S - STREET Rear::94-00 The "S" is for street. These are an old favorite of mine. They work great for street/autocross and light track duty. Most track days this is what I have in the rear of my 99 track toy. They dust a bit but the performance is consistent from street... More Info
	Wilwood E Compound Miata BIG Kit Brake Pads (four piston kits) Miata brake pads to fit our Miata brake kit. These have higher friction then the Q pads, and a higher temperature range as well. Of course, they produce more dust and won't last as long. Only fits our Big Brake Kit. PolyMatrix "E"... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton