Miata 1990-2005: Brakes : Pads

Porterfield R4- RACE Front Miata Brake Pads : 94-02

Hardcore race Miata Brake Pads - for the spec miata guys looking to try something other than the hawks. While the hawk blues tear up your rotors these give you the coefficient of friction and temp range without destroying your rotors. Very good race pad....my favorite choice for full time track pad!

Customers who bought Porterfield R4- RACE Front Miata Brake Pads : 94-02 also often bought:
	Porterfield R4-RACE Miata Brake Pads Rear::94-02 Hardcore Miata Brake Pads for RACE use - for the spec miata and other Miata track users looking to try something other than the hawks. While the hawk blues tear up your rotors these miata brake pads give you the coefficient of friction and temp range... More Info
	Porterfield R4S - STREET Rear::94-00 The "S" is for street. These are an old favorite of mine. They work great for street/autocross and light track duty. Most track days this is what I have in the rear of my 99 track toy. They dust a bit but the performance is consistent from street... More Info
	Porterfield R4S -STREET Front::94-02 The "S" is for street. These are an old favorite of mine. They work great for street/autocross and light track duty. Most track days this is what I have in the rear of my 99 track toy. They dust a bit but the performance is consistent from street... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton