Miata 1990-2005: Brakes : Hydraulics

Wilwood Brake Fluid : All

Wilwood 570 Degree Brake Fluid,Wilwood's specially formulated Hi-Temp_ 570 Racing Brake Fluid has a minimum 570_ F dry bOiling point to withstand the severe heat requirements of automotive racing. Hi-Temp_ 570's low viscosity allows easy bleeding of your brake system, eliminating aeration.

Customers who bought Wilwood Brake Fluid : All also often bought:
	Goodridge Stainless Steel Miata Brake Lines - Stainless Finish---YES, IN STOCK::90-05 High performance Goodridge "G-Stop" stainless braided Miata brake lines eliminate the mushy pedal feel you get when your OEM Miata rubber lines expand. Utilizing Teflon tubing with a stainless steel outer tube, this 4-line Miata brake line set is... More Info
	Porterfield R4S -STREET Front::94-02 The "S" is for street. These are an old favorite of mine. They work great for street/autocross and light track duty. Most track days this is what I have in the rear of my 99 track toy. They dust a bit but the performance is consistent from street... More Info
	Porterfield R4S - STREET Rear::94-00 The "S" is for street. These are an old favorite of mine. They work great for street/autocross and light track duty. Most track days this is what I have in the rear of my 99 track toy. They dust a bit but the performance is consistent from street... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton