Miata 1990-2005: Ignition

Enduralon Spark Plug Wire Set - Red : 90-00

Available in yellow or red, these plug wire kits are superior to your original O.E. plug wires and feature special CPE jacketed wire for high performance needs and endurance in extreme temperatures.

Customers who bought Enduralon Spark Plug Wire Set - Red : 90-00 also often bought:
	Westco 12V31M Miata Battery The Westco Miata battery utilizes absorbed glass mat technology for approximately 30% more cranking amps than a stock Miata battery. With this latest design, terminal location is OEM correct and installation of this Miata battery is easy. FED EX Ground... More Info
	Quality Rubber Shift Boot - Large--::90-05 Torn rubber shift boots allow fumes and extra noise into the interior. If you have noticed a change for the worse in your Miata it is time to change one or both of the factory boots. The smaller, lower boot, sits on top of the transmission at the... More Info
	Braided Stainless Steel Clutch Line::90-94 Our high performance stainless braided clutch line offers superior performance, longer life and better pedal feel since OEM rubber lines expand. Utilizing Teflon tubing with a stainless steel outer tube, this line is a must for any clutch system. More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton