Miata 1990-2005: Clutch, Flywheel, Drivetrain

Racing Beat Disc Street/Strip 90-93

The Racing Beat Street/Strip Clutch Disc is designed for high-performance street applications, and for occasional drag or road racing with a stock or slightly modified engine. The high yield/high burst strength Ferodo lining ensures a long life of smooth, not for supercharged or turbo motors.

Customers who bought Racing Beat Disc Street/Strip 90-93 also often bought:
	NEW KONI RACE shock Front::1990-2005 A full inch shorter bodies and MUCH more aggressive valving combine for a motorsports legend in the making. Koni's new RACE shocks for the Miata are perfect for use with high spring rates such as those that come with our Ground Control Coilover kits. ... More Info
	Miata Header Heatshield Blanket--New UPDATED VERSION NEW version shown on the RIGHT. This updated Miata Header Heat Shield has been improved with an additional layer of fiberglass mat and increased in size by about 20% so it works better with the Racing Beat header and the NC cars. It also works well on... More Info
	Koni Adjustable Sport Miata Shock--8041-1204 SPORT REAR--SPECIAL!::90-97 Miata shocks come in many flavors but these are our favorite Miata shocks. The most popular Miata shock for the last decade with Miata street users, autocrossers and track drivers alike. These Koni Miata shocks always seem to work just a little better... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton