Miata 1990-2005: Intakes : Racing-Beat

Racing Beat HighFlow Miata Intake : 94-97

For any Miata this Racing Beat Miata Intake Kit uses a cast aluminum tube and a large KandN filter to provide better than stock performance. Aggressive sound, easy installation, no permanent changes. NOW INCLUDES CRUISE CONTROL RELOCATION KIT!!! Emissions legal with CARB certification.

Customers who bought Racing Beat HighFlow Miata Intake : 94-97 also often bought:
	Racing Beat Miata Header::94-97 Our favorite Miata header for normally aspirated Miatas, consistently outperforms the Jackson Header and for less money. Manufactured entirely from 304-stainless steel for superior durability, this 4:1 Miata header is sure to offer many years of... More Info
	Koni Adjustable Sport Miata Shock--8041-1204 SPORT REAR--SPECIAL!::90-97 Miata shocks come in many flavors but these are our favorite Miata shocks. The most popular Miata shock for the last decade with Miata street users, autocrossers and track drivers alike. These Koni Miata shocks always seem to work just a little better... More Info
	Racing Beat Front Miata Sway Bar - Tubular::94-97 Our first choice in Miata sway bars....Racing Beat-designed Miata sway bars reduce chassis roll in turns and increase your Miata's sensitivity to steering inputs, thereby improving maximum cornering power. One of the first steps that a Miata... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton