MX5 2006-2012: Bargain Bin

Bilstein Factory Sport Package Shock...REAR : 2006-2007

Off our 2006 MX5...with only 100 miles of use. Sorry, we don't have a complete set of four shocks but for the guy that needs ONE single replacement after hitting a curb, etc., here is a great deal. Includes factory top mount. SOLD...GONE..

Customers who bought Bilstein Factory Sport Package Shock...REAR : 2006-2007 also often bought:
	HOTCHKIS RX-8 Sport Sway Bar..FRONT SWAY ONLY!!!::04-11 Stock class autocross FRONT ONLY sway bar, features extensively tested 33mm 3 position adjustable front bar. Front Sway Bar is three position: -Lightweight, durable and adjustable 1-5/16 (33mm)hollow; -110% stiffer than the stock sway bar... More Info
	HEADER INSTALLATION Short extension cord for prime/trim O2 Sensor...for use ONLY when installing RoadsterSport header.::all This is a recommended option for the RoadsterSport header. This is an extension cord for the FIRST O2 sensor which does provide fuel trim data to the factory ECU. With both O2 sensors out your NC will run the safe default map which is overly rich. ... More Info
	Enkei RP-F1 17x8, 45mm offset 5x114, 15.6 pounds::all Two pounds LIGHTER than the stock rim but a full inch wider! Nothing else comes close to this combination of ultra light weight and strength (Rolling Rim technology used to make these rims results in grain alignment just like in forged wheels for greater... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton