Miata 1990-2005: Wheels and Tires : Wheels

Team Dynamics Pro Race 15x7 1.2 30mm High Power Silver

New version of the Team Dynamics Pro Race 1 with the spokes just a little more withdrawn from the face for the spec guys actually rubbing their neighbors! Now in stock in 30mm. No need for hubcentric rings because these are milled 54mm hubcentric for the Miata. Center caps not included with any Team Dynamic wheel but available on this website. Weighs a little over 13 pounds.

Customers who bought Team Dynamics Pro Race 15x7 1.2 30mm High Power Silver also often bought:
	Koni Adjustable Sport Miata Shock--8041-1204 SPORT REAR--SPECIAL!::90-97 Miata shocks come in many flavors but these are our favorite Miata shocks. The most popular Miata shock for the last decade with Miata street users, autocrossers and track drivers alike. These Koni Miata shocks always seem to work just a little better... More Info
	KONI Adjustable Sport Miata Shock--8041-1203 FRONT SPECIAL::90-97 Miata shocks come in many flavors but these are our favorite Miata shocks. The most popular Miata shock for the last decade with Miata street users, autocrossers and track drivers alike. These Koni Miata shocks always seem to work just a little... More Info
	Falken Azenis RT-615-K 205/50/15--Mounted and Balanced A great dual purpose Miata tire that works well for the street tire classes of SCCA autocross, aggressive Miata street driving, and even light Miata track days. An amazing combination of grip in both dry and wet. And here's a surprise, unlike the old 215... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton