Miata 1990-2005: Wheels and Tires: Wheels

ENKEI RP-F1 15x7-Silver 35mm offset


ENKEI RP-F1 15x7-Silver 35mm offset
Part Number: 21-1050
Price: $199.99
Quantity:

Nothing beats this Enkei for quality, light weight and price. Fits Miata, and many Hondas and Toyotas that share the 4x100 bolt pattern. These are a personal favorite on the Miata for their combination of great quality, great finish, strength, lightness and price. Just 9.8 pounds each in 15x7 and for a bargain price. Although the Kosei K1-TS look similar in the pictures here don't be fooled, this wheel is much nicer in person and has proven much stronger. Rolling Rim technology means forged like strength. 35mm offset. Note that Enkei does not make a center cap for this size but our KONIG HELIUM center caps will fit this wheel if you must have center caps (remove rear spring from Helium cap, insert main disc from the cap, and spray paint the small quarter-size "Konig" label before installing). Takes a standard 73/54 hubcentric ring sold elsewhere on this website. We strongly recommend you do NOT use your factory lugs, a narrow lug will fit better and not scratch your new wheels. All our lugs are extended length for more contact with the studs and narrow to better avoid scratching (see our McGard Spline Drive Lugs in particular). Does not fit aftermarket or other BIG brake kits (does not fit factory big brakes that were standard in 03-05 and optional from 01 on). Silver Color


Customers who bought ENKEI RP-F1 15x7-Silver 35mm offset also often bought:

Hubcentric Ring set to Fit Miata 73/54 Hubcentric Ring set to Fit Miata 73/54
Most modern aftermarket rims are made with an oversize center bore and the centering ring brings that bore size down to the Miata hub fitment of 54.1 mm. If you have a Miata, these help properly fit your new alloys. Price is for set of FOUR rings. More Info
McGard Spline Drive Lugs and Tool Set McGard Spline Drive Lugs and Tool Set
These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and ordering... More Info
Hubcentric Ring Set for wheel purchase today Hubcentric Ring Set for wheel purchase today
This is your choice if you are buying wheels today and do not know the size you need to fit your Miata - we will put in the correct set. Price is for set of four rings. More Info
Sign Up for our Newsletter
Mazda Talk Forums

Installation Instructions

Re: NC Header Installation

Another set of very complete installation instructions by a customer at Miata.net forum:http://forum.miata.net/vb/showthread.ph ... ost4703239
Posted by Brian

Re: AEM Install for NB

With Brian's help, I was able to get the nut off using some liquid wrench. Applied and let it sit for 4-6 hours, and used a vice grip wrench. Still took some...
Posted by Gecko

AEM with MonsterFlow coolbox Install for NB

Anyone else install the AEM short ram intake had trouble loosening the power steering pump nut? I am still not able to get it off and even took it to a shop ...
Posted by Gecko

Re: NC Goodwin trunk spoiler install

One other question:Is the spoiler made with polyester resin or epoxy resin? Apparently, that makes a difference when painting.Thanks
Posted by slartibartfast

Re: NC Header Installation

Brian,Great. Thanks for the info. As you may have guessed, I'm trying to plan out my next mods. It's tough, since I only have short periods of time to work ...
Posted by skeeler

Mazda Talk Forum
Home About Us Customer Care Technical FAQs Mazda Talk Forums Contact Us

Your Cart | Checkout

Click Model Year
Miata 1990-2005
MX5 2006-2010
RX8 2004-2010
Mazda6 2003-2010
RX7 1979-1995
Mazda3 2005-2010
Need Shipping Quote?
Home About Us Customer Care Technical FAQs Mazda Talk Forums Contact Us
Good-Win Racing Mazda Performance Parts