MX5 2006-2012: Roll Bars

Black Finish Upgraded Bar--FIBERGLASS TRIM ONLY : 2006-2012

Replacement fiberglass trim part ONLY for our Good-Win Racing single hoop bar. Sorry, does not fit the harddog bars.

Customers who bought Black Finish Upgraded Bar--FIBERGLASS TRIM ONLY : 2006-2012 also often bought:
	HAWK HPS FRONT Pad Upgrade::all Step up from your standard factory Miata brake pads with a little more bite and yet still very friendly to rotors and low dust and low noise. These Miata brake pads are great choice for 06 and newer MX5 Miatas. More Info
	HAWK HPS REAR Pad Upgrade::all Step up from your standard factory Miata brake pads with a little more bite and yet still very friendly to rotors and low dust and low noise. These Miata brake pads are great choice for 06 and newer MX5 Miatas. More Info
	Black Finish Upgraded Bar, Version 2!::all Built by our friends at AWR Racing (same company that makes the full cages for Mazda's Spec racing series with this same car!). When Mazda's own choice for building the full race Miata roll cage for the Miata builds a bolt in Miata bar, you can expect a... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton