MX5 2006-2012: Exterior

Trailer Hitch : 2006-2012

Designed exclusively for the Miata, this hitch mounts to the body for superior strength and can handle up to 2000 lbs. towing capacity and 200 lbs. tongue weight. Each kit comes with necessary hardware, including receiver, for easy installation- No welding required. Fits both Soft Top and Hard Top MX-5s. Note optional wiring kit is item 20-1046b. 1-1/4" Class C receiver.

Customers who bought Trailer Hitch : 2006-2012 also often bought:
	HAWK HPS FRONT Pad Upgrade::all Step up from your standard factory Miata brake pads with a little more bite and yet still very friendly to rotors and low dust and low noise. These Miata brake pads are great choice for 06 and newer MX5 Miatas. More Info
	HEADER INSTALLATION LONG extension cord for second O2 Sensor....for use ONLY when installing header into Miata already using ROADSTERSPORT or PPE MIDPIPE.::all This is an option for the RoadsterSport header and Racing Beat Header and PPE LONG TUBE HEADER to allow relocation of your second factory O2 sensor to a position after the converter in a midpipe that so your installation is easy PLUG AND PLAY. Note that... More Info
	Hubcentric Ring set to Fit Miata 72.62mm/54 Most modern aftermarket rims are made with an oversize center bore and the centering ring brings that bore size down to the Miata hub fitment of 54.1 mm. If you have a Miata, these help properly fit your new alloys. Price is for set of FOUR... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton