MX5 2006-2012: Exterior

Removeable Luggage Rack - Vintage Style : 2006-2012

For the on the go Miata driver, we have removable Miata luggage racks! This one gives your car a vintage appearance, like those on the early classic sports cars. This Miata luggage rack is made out of stainless steel and simple to install and remove. Sorry, DOES NOT work on PRHT.

Customers who bought Removeable Luggage Rack - Vintage Style : 2006-2012 also often bought:
	RoadsterSport II Stainless Steel Duals for 06+ MX-5 Miata!::all Our original duals for the 2006 and newer MX5 Miata was the best selling Miata exhaust by a good margin. Messing with the successful design to improve it was approached cautiously. We learned on the dyno in testing for our header that we had ideal flow... More Info
	RoadsterSport "Q" Stainless Steel Premium Adjustable Sound MX5 Miata Exhaust::all Our Best! We make FOUR very different Miata exhaust choices for the 2006 to 2012 MX5 Miata, including the RoadsterSport RACE, RoadsterSport STREET Single, the RoadsterSport II Duals, and this premium duals unit we affectionately call the RoadsterSport Q.... More Info
	HAWK HPS FRONT Pad Upgrade::all Step up from your standard factory Miata brake pads with a little more bite and yet still very friendly to rotors and low dust and low noise. These Miata brake pads are great choice for 06 and newer MX5 Miatas. More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton