MX5 2006-2012: Interior

Voodoo Knob Magnum Spun Finish : 2006-2012

Shifting pleasure....good fit. Note that we only sell the "magnum" version of the round which is not as big as it sounds and has the right weight to work just right.

Customers who bought Voodoo Knob Magnum Spun Finish : 2006-2012 also often bought:
	RoadsterSport II Stainless Steel Duals for 06+ MX-5 Miata!::all Our original duals for the 2006 and newer MX5 Miata was the best selling Miata exhaust by a good margin. Messing with the successful design to improve it was approached cautiously. We learned on the dyno in testing for our header that we had ideal flow... More Info
	RoadsterSport Stainless MX5 Miata Midpipe::all Designed as a bolt-on replacement for the factory midpipe to carry the 2.5 inch outlet of the factory header, and our RoadsterSport and Racing Beat headers, all the way to your choice of any of our 2.5 inch inlet RoadsterSport mufflers. Also bolts up to... More Info
	RoadsterSport RACE MX5 Miata Muffler...Just 7 pounds!::all This MX5 Exhaust was designed for RACING. In particular, this muffler was designed for the autocross and track MX5 Miata drivers. It may also appeal to some MX5 Miata owners who want a SIMPLE AND PROPER SINGLE SIDED MIATA EXHAUST. Let's face facts, dual... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton