MX5 2006-2012: Interior

Voodoo Knob Magnum Polished Finish : 2006-2012

Shifting pleasure....good fit. Note that we only sell the "magnum" version of the round which is not as big as it sounds and has the right weight to work just right.

Customers who bought Voodoo Knob Magnum Polished Finish : 2006-2012 also often bought:
	RoadsterSport II Stainless Steel Duals for 06+ MX-5 Miata!::all Our original duals for the 2006 and newer MX5 Miata was the best selling Miata exhaust by a good margin. Messing with the successful design to improve it was approached cautiously. We learned on the dyno in testing for our header that we had ideal flow... More Info
	Eibach Sway Bar Kit for 2006-2012 Mazda MX-5 Miata---BACK IN STOCK!::all These Mazda MX5 sway bars increase the handling performance of your MX-5 Mazda Miata by reducing body roll. Eibach MX-5 Miata sway bars are high-performance direct replacement upgrades for the factory bars and include EVERYTHING you need to bolt them... More Info
	Aggressive Street Combo of Enkei RP-F1 17x9 Mounted and Balanced with Falken RT-615K 225/45/17::all This combo fits stock fenders with at least a degree of negative camber! Four of Enkei's incredible 16 pound 17x9 RPF1 45mm offset wheels mounted and balanced with Falken RT-615K 225/45/17 super aggressive 200 treadwear ultra performance tires suitable... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton