Miata 1990-2005: Interior

CG-Lock Seat Belt Lock

A favorite for autocrossers. The CG-Lock is engineered to lock the lap belt portion of your seat belt in position, keeping the bodys center of gravity firmly in place even through the most demanding cornering and braking maneuvers. The CG-Lock provides about 80% of the holding power of a full race harness. Does not interfere with seat belt safety. Installs in seconds.

Customers who bought CG-Lock Seat Belt Lock also often bought:
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and... More Info
	Hubcentric Ring set to Fit Miata 73/54 Most modern aftermarket rims are made with an oversize center bore and the centering ring brings that bore size down to the Miata hub fitment of 54.1 mm. If you have a Miata, these help properly fit your new alloys. Price is for set of FOUR rings. More Info
	Miata KOYO Radiator 37mm V1139 ALL Aluminum::90-97 Gain 50% capacity over stock Miata radiator! This miata radiator upgrade is completely plug and play with all OEM hardware including the stock fans and thicker aftermarket sway bars! We asked KOYO to make a unit slightly thinner Miata radiator than... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton