Miata 1990-2005: Gauges

DUAL A-Pillar Gauge Pod : 03-05

Dual gauge design (upper item in photo), these Miata gauge pods allow clever mounting of 2-1/16 gauges to the drivers side Miata A-Pillar. Gauges sold separately.

Customers who bought DUAL A-Pillar Gauge Pod : 03-05 also often bought:
	Konig Gold Feather 15x6.5, 38mm and just 12.4 Pounds! Another great super light weight Miata wheel from Konig and just 12.4 pounds! A modern smooth and clean design that looks bigger than it is because the spokes run all the way to the lips. Gold finish with clear coat for a durable highly reflective... More Info
	Toyo Proxes 4, 205/50/15 mounted and balanced! Your Miata is especially sensitive to unsprung weight and balance issues. That is why we use only the latest computerized Hunter Mount and balance equipment so that the balance is as close to perfect as it can be when your new wheels and tires arrive at... More Info
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton