REVi Intake Kit :: All 2004-2009

After months of exhaustive development and testing, Racing Beat sent us a prototype and it worked great and now we sell the Racing Beat RX8 REVi Intake System. Designed to offer RX8 performance improvements without sacrificing drivability, the Racing Beat RX8 intake system is the final result of hundreds of hours of dyno test sessions and on-road testing. The major components of the REVi RX8 Intake System include: an OEM style air box assembly, custom-designed KandN air filter unit, aluminum mass air flow sensor tube, and a tuned-length air inlet horn. Unlike the vast majority of the aftermarket RX8 intake systems on the market, the Racing Beat RX8 intake system retains one of the important OEM intake track mesh screens to aid with the even distribution of airflow across the mass air sensor. The inclusion of this screen minimizes the possibility of rough idle issues that may occur if both stock screens are eliminated. Working with the design team at KandN Engineering, a high capacity air filter was developed that allowed positioning of a tuned-length intake horn inside the filter body. This filter design allowed a fine-tunning of the length of the air horn to maximize the RX8's performance potential. Most aftermarket intake systems for the RX-8 incorporate a large air filter, which is then connected to the intake manifold with a length of plastic or metal tubing. In many cases, the size of the filter that has been selected will dictate the length of tubing required, severely limiting the critical tuning importance of the air intake tube! The REVi RX8 intake system addresses one of the most common complaints that we hear regarding aftermarket intakes for the RX-8, which is "extremely loud intake noise!" Although a simple unshielded tube-and-filter RX8 intake system may produce respectable top end power, the noise levels that are produced can be unbearably loud. During initial testing with one of more popular aftermarket units, a full-throttle sound level reading of over 90 db was measured inside the RX8, with the windows rolled up! Compared to the stock sound level, most will soon tire of this type of rocket-racer intake buzz. The REVi RX8 intake produces a much more modest intake sound with only a 2-3 db increase over the stock RX* intake system. As described on by one of our prototype test volunteers: "This intake is definitely louder than the factory unit, but not unreasonably so....it actually sounds deep and pretty darn good." Save $20 off regular price!