Miata 1990-2005: Brakes : Pads

Porterfield R4 race Miata brake pads (REAR) : 01-05 Sports Suspension

Miata hardcore race brake pad, not a Miata street brake pad! Look to the R4S sport pad instead for street miata brake pads. Does not include replacement springs and clips. Be sure to choose the correct size for your Miata - the 2001/02 "Sport" Miata brakes and all 2003-04 are different from base 2001-02 brakes.

Customers who bought Porterfield R4 race Miata brake pads (REAR) : 01-05 Sports Suspension also often bought:
	Porterfield R4 race Miata brake pads (front)::01-05 Sports Suspension Miata hardcore race brake pad, not a Miata street brake pad! Look to the R4S sport pad instead for street miata brake pads. Does not include replacement springs and clips. Be sure to choose the correct size for your Miata - the 2001/02 "Sport" Miata... More Info
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and... More Info
	Koyo Performance Radiator Cap Koyo designs its radiators to take all factory spec parts which means your factory cap will fit, and your factory plug will fit, and your factory fans will bolt right on. But for those who want an upgraded new cap to go with their new Miata Koyo... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton