Miata 1990-2005: Brakes : Pads

Hawk HPS Rear SPORT Miata Brake Pads : 01-02

Step up from your standard factory Miata brake pads with a little more bite and yet still very friendly to rotors and low dust and low noise. These Miata brake pads are great choice for 01 and newer Miatas with the sport package brakes. BE CAREFUL, these fit only the 01-02 Miatas with the larger SPORT brakes. Some 01-02 Miatas still had standard 1.8 brakes so ask if unsure before you order.

Customers who bought Hawk HPS Rear SPORT Miata Brake Pads : 01-02 also often bought:
	Hawk HPS Miata Brake Pad Set - Front::01-05 Sports Suspension A step up from your standard factory pads with a little more bite and yet still very friendly to rotors and low dust and low noise. These are great choice for the MSM and other 01 and newer Miatas with the sport package brakes. More Info
	Premium DBA Cross Drilled/Slotted Miata Brake Rotor Set - REAR SALE!::01-05, FACTORY SPORT Quality Disc Brakes Australia slotted and drilled rotors...same company that makes our two piece big brake kit rotors. These stock size cross-drilled slotted Miata brake rotors are great in the wet and look great. Recommended for Miata street... More Info
	Premium DBA Cross Drilled/Slotted Miata Brake Rotor Set - Front SALE!::01-05, FACTORY SPORT Premium Quality Disc Brakes Australia Miata Brake Rotors. Cross-drilled slotted Miata brake rotors give better than stock performance by preventing pad float on water splashed onto the rotors during wet conditions and gases from the pad surface and the... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton