RX7 1979-1995: Wheels and Tires

Konig REWIND Silver Special RX7 4x110 fitment--15x7 : 1979-1983

Made for first generation RX7 fitment 4x110 with 20mm offset. Weighs 14.6 pounds on our scale. See great pictures of these on a new MazdaSpeed Miata and other Miatas in our wheel gallery in our forum. Fits 1979 through 1983 4x110 bolt pattern RX7s.

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Customers who bought Konig REWIND Silver Special RX7 4x110 fitment--15x7 : 1979-1983 also often bought:
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent loosening up under load), and a wheel lock. An RX7 takes 20 of these and ordering... More Info