Miata 1990-2005: Wheels and Tires : Wheels

Team Dynamics 14x7 Pro Race 1.2 38mm Anthracite

New version of the Team Dynamics Pro Race 1...with the spokes just a little more withdrawn from the face for the spec guys actually rubbing their neighbors! Now in stock in 38mm. Takes a standard 73/54 hubcentric ring. Just under 12 pounds each. ORDER NOTE: The 14x7 size is now a special order from factory in England and that means 4 weeks to get.

Customers who bought Team Dynamics 14x7 Pro Race 1.2 38mm Anthracite also often bought:
	Hubcentric Ring set to Fit Miata 73/54 Most modern aftermarket rims are made with an oversize center bore and the centering ring brings that bore size down to the Miata hub fitment of 54.1 mm. If you have a Miata, these help properly fit your new alloys. Price is for set of FOUR rings. More Info
	Kumho Ecsta V710 225/50-14 mounted and balanced! Add these to a set of our Team Dynamics 14x7 wheels and the price includes valve stems, mount, and balance using our top of the line Hunter mount and balance equipment on any of the 14x7 inch rims we sell. Quantity: ECSTA V710 radials are DOT-legal... More Info
	Goodridge Stainless Steel Miata Brake Lines - Stainless Finish---YES, IN STOCK::90-05 High performance Goodridge "G-Stop" stainless braided Miata brake lines eliminate the mushy pedal feel you get when your OEM Miata rubber lines expand. Utilizing Teflon tubing with a stainless steel outer tube, this 4-line Miata brake line set is... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton