Miata 1990-2005: Wheels and Tires : Wheels

Team Dynamics 15x7 Pro Race 1.2 30mm White

New version of the Team Dynamics Pro Race 1...with the spokes just a little more withdrawn from the face for the spec guys actually rubbing their neighbors! Now in stock in 30mm. Takes a standard 73/54 hubcentric ring. 13+ pounds each.

Customers who bought Team Dynamics 15x7 Pro Race 1.2 30mm White also often bought:
	Miata KOYO Radiator 37mm V1139 ALL Aluminum::90-97 Gain 50% capacity over stock Miata radiator! This miata radiator upgrade is completely plug and play with all OEM hardware including the stock fans and thicker aftermarket sway bars! We asked KOYO to make a unit slightly thinner Miata radiator than... More Info
	Team Dynamics Pro Race 15x7 1.2 30mm High Power WHITE New version of the Team Dynamics Pro Race 1 with the spokes just a little more withdrawn from the face for the spec guys actually rubbing their neighbors! Now in stock in 30mm. No need for hubcentric rings because these are milled 54mm hubcentric for the... More Info
	Hubcentric Ring set to Fit Miata 73/54 Most modern aftermarket rims are made with an oversize center bore and the centering ring brings that bore size down to the Miata hub fitment of 54.1 mm. If you have a Miata, these help properly fit your new alloys. Price is for set of FOUR rings. More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton