Miata 1990-2005: Brakes : Pads

Hawk BLUE Sport Miata Front Brake Pads : 01-05 Sports Suspension

For Miata track duty! Not a Miata street pad! Temperature range 500-1000 degrees. Hawk recommends if another brand of carbon pad has been used on rotors previously, before using any Hawk compound pads, resurface or replace the rotors.

Fits all 03-05 Mazda Miatas.
Also fits 01-02 Mazda Miatas with Sports Suspension factory "big brakes" which were optional in 01-02 and standard from 03-05.

Customers who bought Hawk BLUE Sport Miata Front Brake Pads : 01-05 Sports Suspension also often bought:
	Hawk HP PLUS Sport Miata Front Brake Pads::01-05 Sports Suspension Hawk HP PLUS Miata Performance Street PLUS Race Worthy compound. Hawk Performance HP Plus material can take the heat at the track and get you home safely without having to change your brake pads in and out. This compound was designed for the serious... More Info
	Ralco RZ Performance Short Throw Shifter Mazda Miata 1990-2005 5 speed....Includes shift knob...SUPER SALE! These Miata short shifters are made from the highest quality aluminum and hardened steel. Every Ralcorz Miata Short Shift kit is precision-made for each application. A premium Miata sport shifter engineered for the enthusiast. This Miata Short Shifter... More Info
	Hawk HP PLUS Sport Rear::03-05 w/Sport Suspension Miata brake pads by Hawk in the HP PLUS Performance Street PLUS. This is a good dual purpose Miata brake pad....streetable yet trackable too. Hawk Performance HP Plus material can take the heat at the track and get you home safely without having to... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton