MX5 2006-2012: Exhaust

RoadsterSport "Q" Stainless Steel Premium Adjustable Sound MX5 Miata Exhaust :: 2006-2012

RoadsterSport "Q" Stainless Steel Premium Adjustable Sound MX5 Miata Exhaust
Part Number: 60-1337
Application: 2006-2012
Price: $399.00
Quantity:
Our Best! We make FOUR very different Miata exhaust choices for the 2006 and newer MX5 Miata, including the RoadsterSport RACE, RoadsterSport STREET Single, the RoadsterSport II Duals, and this premium duals unit we affectionately call the RoadsterSport Q.

This attenuation chamber design unit is the most mild and mellow on an otherwise stock Miata...about 10 to 15% louder than stock...with a deep burble. This unit was designed for both improved flow performance AND the best sound absorbing ability possible.

This premium MX5 muffler is the BEST choice for those who plan such additional mods as a supercharger or header change (which unleashes a massive amount of additional sound). This attenuation design is also a premium "NO-DRONE" choice for those with the AUTOMATIC transmission which tends to keep the RPMS in the lower ranges. By using smooth mandrel bent 2.5 inch tubing to redirect the flow for a side entrance to the muffler we engineered a sound wave attenuation first chamber to knock down volume level dramatically while maintaining a flow-through design. Our latest and best dyno results for the header change which are in our forum were obtained with this muffler....ALL THE FLOW, without the noise! Yes, simple BOLT ON that bolts to our midpipe, or the factory midpipe, or our Racing Beat midpipes. Weight is 24 pounds (stock unit is about 27 pounds).

BRIAN'S APPLICATION NOTES: Everything we have learned about MX5 exhausts, all our best tricks, have gone into this RoadsterSport Q. It is the perfect choice for anyone planning future upgrades such as a header change or supercharger. Also a perfect choice for those looking for a more than stock but still mellow sounding Miata exhaust. Finished in three inch tips which INCLUDE our exclusive baffle cone inserts which are REMOVEABLE and allow you to set the sound to sporty...or quiet. Also available are optional packed baffles (see separate product description) with which you can quiet it down even more for those using a header or supercharger, or race midpipe, etc. This system is 10% to 15% louder than the stock muffler on an otherwise stock MX5 exhaust system....and only about 20 to 25%% over stock sound level when used with our complete 2.5 inch RoadsterSport header and 2.5 inch RoadsterSport midpipe. Baffles are retained by small hex bolts inserted from well under each tip. Installation of this Miata exhaust is SUPER EASY...just two bolts! You don't even need to jack up the car, this installation can be done in your driveway! This Miata exhaust is guaranteed for as long as you own your Miata.

Proudly made in the USA with a LIFETIME WARRANTY. Fits all 2006 and newer with manual transmission MX5 Miata, automatic transmission MX5 Miata, and retractable hardtop MX5 Miata! This Miata Exhaust is the choice on my own MX5 for driving around town...and my strong recommendation for anybody wanting an exhaust with a super smooth burble, or any owner planning additional exhaust changes (header change or supercharger). This is also our top recommendation for owners of the automatic transmission and Power Retracting Hardtop!

SOUND Files at our Exhaust Blog---CLICK HERE TO LISTEN AND READ MORE.

Customers who bought RoadsterSport "Q" Stainless Steel Premium Adjustable Sound MX5 Miata Exhaust :: 2006-2012 also often bought:
RoadsterSport Stainless MX5 Miata Midpipe::06-12 RoadsterSport Stainless MX5 Miata Midpipe::06-12
Designed to work with our RoadsterSport Duals or RoadsterSport Race muffler as a simple bolt on (will also bolt up to our Racing Beat exhaust, MazdaSpeed exhausts, and all headers that we sell etc.).

Our midpipe gains 5 to 8 Ft/Lbs of torque from 3500... More Info

RoadsterSport All Stainless Steel MX5 Miata Header::06-12 RoadsterSport All Stainless Steel MX5 Miata Header::06-12
Gorgeous! Nothing comes close to our famous RoadsterSport MAX Power Header! Look at those smooth curves! Sexy all T304 polished stainless steel is formed into equal length primaries for max power...with a lifetime warranty!

We have included a... More Info

HEADER INSTALLATION Short extension cord for prime/trim O2 Sensor...for use ONLY when installing RoadsterSport header. HEADER INSTALLATION Short extension cord for prime/trim O2 Sensor...for use ONLY when installing RoadsterSport header.
This is a recommended option for the RoadsterSport header. This is an extension cord for the FIRST O2 sensor which does provide fuel trim data to the factory ECU. With both O2 sensors out your NC will run the safe default map which is overly rich. ... More Info

Customer Reviews: RoadsterSport "Q" Stainless Steel Premium Adjustable Sound MX5 Miata Exhaust :: 2006-2012

Just received and installed the Roadster "Q" exhaust. I love it--great sound. I also have the AEM cold air intake I purchased from you and installed last year. The combination is great. Even my wife is impressed with how much more peppy the Miata is now. Not sure when I will get around to a new mid-pipe and header but even without them--the change is remarkable.

Thanks,

Tim

-- Timothy H., United States ( 2007 MX-5 )

Brian,

Thanks for the great service getting my "Q" exhaust to me.
After running the race single for over two years I was afraid the Q would be too quiet- but it sounds great with the midpipe and NO BOOM!!

I love it.

As usual, it's a gorgeous piece of hardware.

Pat R

-- Pat R., Tigard, Oregon ( 2006 NC )

Thanks for all your help re: the race exhaust.. I've installed it and I love it........ very very nice piece.

-- Richard L.

I installed the Q sport today in my 2008. It sounded great and even better
when I removed the baffles. Thank you for the prompt shipment and a fine
product. I look forward to more changes, i.e. header, intake and so on.

-- Tom A.

Want to Review This Product?
(You must be a previous customer of Good-Win-Racing or registered member of our MazdaTalkForum.)

Sign Up for our Newsletter
Mazda Talk Forums

Installation Instructions

Re: NC Rollbar Installation

sjd wrote:Brian wrote:Assuming the hardtop is staying on then the best we can offer is the Nasa with petty bar. I think we have one in stock in black (silver ...
Posted by Brian

Re: NC Rollbar Installation

Brian wrote:Assuming the hardtop is staying on then the best we can offer is the Nasa with petty bar. I think we have one in stock in black (silver would take...
Posted by sjd

Re: NC Rollbar Installation

Brian wrote:Yes, standard NASA spec bar in stock currently. Obviously no passenger with the Petty bar. Note you can put the Petty bar in for events and take ...
Posted by pdxa4

Re: NC Rollbar Installation

Yes, standard NASA spec bar in stock currently. Obviously no passenger with the Petty bar. Note you can put the Petty bar in for events and take it out if ...
Posted by Brian

Re: NC Rollbar Installation

Brian wrote:Assuming the hardtop is staying on then the best we can offer is the Nasa with petty bar. I think we have one in stock in black (silver would take...
Posted by pdxa4

Mazda Talk Forum
Home About Us Customer Care Technical FAQs Mazda Talk Forums Contact Us
Click Model Year
Miata 1990-2005
MX5 2006-2012
Bargain Bin
Brakes
Clutch, Flywheel, Drivetrain
Data and Video
Engine
Exhaust
Exterior
Ignition
Intakes
Interior
Roll Bars
Superchargers and Turbos
Suspension
Tops and Tonneau Covers
Wheels and Tires
RX8 2004-2011
Mazda6 2003-2012
RX7 1979-1995
Mazda3 2005-2012
Mazda2 2012
Home About Us Customer Care Technical FAQs Mazda Talk Forums Contact Us
Good-Win Racing Mazda Performance Parts