Miata 1990-2005: Roll Bars : Boss-Frog

Clearview Vinyl Cover for SFI Padding

Vinyl Covers for Clearview SFI padding - these covers are the same material and design as the double hoop covers, except there is velcro closures instead of zippers. Because of slight variations in the location of the brace bars, these covers may require trimming. Note these are designed to fit over SFI padding and won't fit right without the padding....so order the padding too!

Customers who bought Clearview Vinyl Cover for SFI Padding also often bought:
	SFI rated pad, Boss Frog Clearview Good idea to protect your head with an SFI rated pad that is molded to fit your Boss Frog Clearview. Note that pads should be covered because UV light degrades them. More Info
	Boss Frog Clearview Miata Rollbar Black--MAXX The Boss Frog Clearview Maxx combines the best of both worlds, the height and strength of a real SCCA compliant rollbar, with the maximum recline angle of non-compliant style bars. Now you can truly recline the seat all the way back, and still have the... More Info
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton