MX5 2006-2012: Exterior

Polished Stainless Steel Grille : 2006-2012

Mazda finally gave the Miata a grille in 06 but it ended up being made in black plastic. We found this great looking grille, and best of all, it is made in highly polished stainless steel. Not only will your Miata continue to be protected, our gleaming grille will enhance its appearance..

Customers who bought Polished Stainless Steel Grille : 2006-2012 also often bought:
	CG-Lock Seat Belt Lock::all A favorite for autocrossers. The CG-Lock is engineered to lock the lap belt portion of your seat belt in position, keeping the bodys center of gravity firmly in place even through the most demanding cornering and braking maneuvers. The CG-Lock... More Info
	Stainless Steel Brake Lines for MX5 Miata--RED COLOR::all High performance stainless braided Miata brake lines eliminate the mushy pedal feel you get when your OEM Miata rubber lines expand. Utilizing Teflon tubing with a stainless steel outer tube, this Miata brake line set is DOT-approved, and works perfectly... More Info
	Cosworth Factory AirBox Mazda MX-5 Filter::all Optional for use with Cosworth Supercharger Kits. Cosworth Performance Air Filters are constructed from a proprietary synthetic, non woven single layer, pleated polyester filter media that requires no oiling. For an OE like fit, the filter housing is... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton