MX5 2006-2012: Suspension : Braces

Beatrush HARNESS Brace Bar : 2006-2012

Beatrush products are produced by Laile after extensive testing on race tracks in Japan. Each Beatrush brace is designed to improve the responsiveness of the MX5 NC Miata platform with quality, strong, and yet light weight bolt on parts.

Fits all 06+ Mazda Miata MX-5 (NCEC). Light Weight, Strong, and Rigid Made of Steel The Brace Bar is located to enable installation of a racing harness (Note that bar is threaded for EYE bolts shown but does NOT include them...).

Customers who bought Beatrush HARNESS Brace Bar : 2006-2012 also often bought:
	Black Finish Upgraded Bar, Version 2!::all Built by our friends at AWR Racing (same company that makes the full cages for Mazda's Spec racing series with this same car!). When Mazda's own choice for building the full race Miata roll cage for the Miata builds a bolt in Miata bar, you can expect a... More Info
	Racing Beat MX5 Miata Exhaust -- Sale!::2006-2008 Latest version from Racing Beat, more flow than stock and a mild sound in all stainless steel construction. The Racing Beat Exhaust for the MX-5 is manufactured using 304-stainless steel materials for outstanding appearance and excellent durability. 2.25... More Info
	HAWK HPS FRONT Pad Upgrade::all Step up from your standard factory Miata brake pads with a little more bite and yet still very friendly to rotors and low dust and low noise. These Miata brake pads are great choice for 06 and newer MX5 Miatas. More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton