Miata 1990-2005: Bargain Bin

ProDryFilter

Need a modern dry media filter. Washes clean with soap and water, let dry, and reuse. Includes the filter plus a hose clamp. Filter has accordion style opening and clamps easily to cross tubes of diameter 2.75 to 3 inches.

Customers who bought ProDryFilter also often bought:
	Racing Beat Miata Header::99-00 Our favorite Miata header for normally aspirated Miatas, consistently outperforms the Jackson Header and for less money. Manufactured entirely from 304-stainless steel for superior durability, this 4:1 Miata header is sure to offer many years of... More Info
	Race Header O2 Wiring Kit::99-00 This Race Header Kit* is intended for the installation of a 1999-2000 Miata Racing Beat header into a California Emissions Equipped Model (CEEM). Several states now sell California emissions equipped models, to determine if your car is equipped with... More Info
	Koyo Performance Radiator Cap Koyo designs its radiators to take all factory spec parts which means your factory cap will fit, and your factory plug will fit, and your factory fans will bolt right on. But for those who want an upgraded new cap to go with their new Miata Koyo... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton