MX5 2006-2012: Suspension : Sway-Bars

PowerGrid Miata Endlinks...>FRONT STANDARD : 2006-2012

The Powergrid Miata Endlinks incorporate adjustable THK resin ball-stud links. These are much like the factory style links in that performance is totally silent...yet range of articulation is greater than Heim links and length is adjustable. Waterproof seals! 50 degrees of articulation. This eliminates binding and allows for smooth load transitions. Fits FRONT MX5. Price is per pair.

Customers who bought PowerGrid Miata Endlinks...>FRONT STANDARD : 2006-2012 also often bought:
	PowerGrid Miata Endlinks...>REAR::all The Powergrid Miata Endlinks incorporate adjustable THK resin ball-stud links. These are much like the factory style links in that performance is totally silent...yet range of articulation is greater than Heim links and length is adjustable. Waterproof... More Info
	HAWK HPS FRONT Pad Upgrade::all Step up from your standard factory Miata brake pads with a little more bite and yet still very friendly to rotors and low dust and low noise. These Miata brake pads are great choice for 06 and newer MX5 Miatas. More Info
	MX5 Miata Flywheel by Fidanza -- SALE, Save $30!::all A Miata flywheel raises the fun factor! Better throttle response and faster acceleration. CNC-manufactured from 6061-T6 aluminum, these MX5 Miata flywheels increase performance while reducing stress on your crankshaft and bearings. And, if you're... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton