Singular Motorsports ECU Bracket for 90-93 Miata

DESCRIPTION

NEW 90-93 Miata ECU Mounting Bracket in Aluminum by Singular Motorsports. IF you swap to one of our Megasquirt or Adaptronic ECU upgrades you end up having a quandary about how to mount your new ECU. Seen a lot of customers simply use some sheet metal screws and the results are less than secure or stable. This bracket picks up stock mounting holes and and is pre-drilled to mount Megasquirt or Adaptronic ECU upgrades in a professional and secure manner. Picture below shows how this bracket keeps ECU in STOCK LOCATION UNDER the factory Kick Plate.

FEATURE LIST
ECU Bracket for the 90-93 miata
Hole patterns for Megasquirt, MS3 Pro, AMS EMS-4 and Adaptronic. Can accept lots of other ECUs as well you just drill a couple holes wherever needed for the ECU you have.
Places your ECU in the protected factory location (passenger footwell)
'Floats' above the floor but UNDER the stock kick plate: keeps the ECU cool and dampens vibration
Brushed aluminum and Lightweight (weighs only 6 ounces)

For those with REVERENT-built (MS-Labs) ECUs, a small pair of adapter tabs are necessary to fit the ECU to this bracket. Write in the notes during checkout that you need these and we'll include them. Please note if you have Reverent's older style MS3 Basic ECU with a larger footprint this bracket will not be compatible.

FITMENT NOTE: Not compatible with ABS equipped 1990-1993 cars, as there is an additional ABS computer in the passenger footwell that interferes with the bracket. ABS is quite rare on these early cars, but if you have ABS please check for that computer before ordering this. Cars with ABS swapped in from later years of Miatas should not have this issue.