Good-Win Racing Mazda Performance Parts

cory's PTD - plano, TX

Click on any of the photos to enlarge and start a slideshow!

Performance Parts Used In cory's PTD

Miata MX5 2006-2015: Brakes


Miata MX5 Brake Ducting Kit Miata MX5 Brake Ducting Kit
06-08
$279.00

Miata MX5 2006-2015: Brakes : Hydraulics


Techna-Fit MX5 Miata Stainless Steel Brake Lines Techna-Fit MX5 Miata Stainless Steel Brake Lines
2006-2015
$99.00
Wilwood Brake Fluid Wilwood Brake Fluid
2006-2015
$9.95

Miata MX5 2006-2015: Brakes : Pads


Hawk Blue Brake Pad Set - FRONT Hawk Blue Brake Pad Set - FRONT
2006-2015

Track/Race

$129.00
Hawk Blue Brake Pad Set - REAR Hawk Blue Brake Pad Set - REAR
2006-2015

Track/Race

$124.00

Miata MX5 2006-2015: Clutch, Flywheel, Drivetrain


Limited Slip by Tomei Limited Slip by Tomei
2006-2015
$890.00
RX8 Front Hub Upgrade For MX5 RX8 Front Hub Upgrade For MX5
2006-2015

FACTORY OEM.

$219.99
$199.99
Sale!
Short Shifter--For 6 SPEED TRANS ONLY! Short Shifter--For 6 SPEED TRANS ONLY!
2006-2015 6 Speed
$159.00
TOMEI Hypoid LSD Gear Oil TOMEI Hypoid LSD Gear Oil
2006-2015
$49.00

Miata MX5 2006-2015: Engine


Steel and Polyurethane Motor Mounts 70 Durometer Steel and Polyurethane Motor Mounts 70 Durometer
2006-2015
$220.00

Miata MX5 2006-2015: Miata Exhaust


Complete Good-Win Racing Edition 1.62 Inch Primary PPE LONG tube MX5 Header and Midpipe - Stainless Steel Complete Good-Win Racing Edition 1.62 Inch Primary PPE LONG tube MX5 Header and Midpipe - Stainless Steel
2006-2015

LARGER PRIMARY VERSION! FREE O2 Extension Cords for PLUG AND PLAY INSTALL

$1050.00
$989.00
Sale!
RoadsterSport RACE MX5 Miata Muffler, Just 8 pounds! RoadsterSport RACE MX5 Miata Muffler, Just 8 pounds!
2006-2015
$229.00

Miata MX5 2006-2015: Exterior


DG Motorsports Racer MX5 Miata Carbon Fiber Hardtop! DG Motorsports Racer MX5 Miata Carbon Fiber Hardtop!
2006-2015
$1,800.00

Miata MX5 2006-2015: Intakes


MAZDASPEED/AEM Cold Air Intake - Gunmetal Gray Finish MAZDASPEED/AEM Cold Air Intake - Gunmetal Gray Finish
2006-2008
$467.19
$316.99
Sale!

Miata MX5 2006-2015: Interior


Voodoo Knob Magnum Black Textured Finish Voodoo Knob Magnum Black Textured Finish
2006-2015
$38.00

Miata MX5 2006-2015: Roll Bars


ROLL CAGE, FULL ROLL CAGE, FULL
2006-2015
$2,499.00

Miata MX5 2006-2015: Suspension : Braces


Beatrush PPF Performance Bar Beatrush PPF Performance Bar
2006-2015
$299.00
$218.00
Sale!

Miata MX5 2006-2015: Suspension : Coilovers


Ohlins Road and Track Miata DFV - OUR BEST MX5 MIATA COILOVER Ohlins Road and Track Miata DFV - OUR BEST MX5 MIATA COILOVER
2006-2015

The BEST MX5 Miata Coilovers! MODERN THREE-PIECE DESIGN for custom pre-load on the springs and travel...WITHOUT use of helper springs!

$2599.00
$1,975.00
Sale!

Miata MX5 2006-2015: Suspension : Sway-Bars


AWR MX5 REAR "STREET/Track/Autocross" Heim HD link for aftermarket bars AWR MX5 REAR "STREET/Track/Autocross" Heim HD link for aftermarket bars
2006-2015
$95.00
AWR NC MX5 FRONT "Autocross/Track" Heim HD link for aftermarket bars AWR NC MX5 FRONT "Autocross/Track" Heim HD link for aftermarket bars
2006-2015
$95.00
Progress Technologies MX5 FRONT and REAR AntiSway Bar Combo Progress Technologies MX5 FRONT and REAR AntiSway Bar Combo
2006-2015

Our BEST MX5 Sways!

$399.00
$344.00
Sale!

Miata MX5 2006-2015: Wheels : Accessories


McGard Spline Drive 20 Lugs and Tool Set McGard Spline Drive 20 Lugs and Tool Set
2006-2015
$82.00

Miata MX5 2006-2015: Wheels : Wheels


Enkei 17x9 RPF1, 45mm offset 5x114, 15.9 pounds Silver Enkei 17x9 RPF1, 45mm offset 5x114, 15.9 pounds Silver
2006-2015 17x9
$285.00
$229.00
Sale!

REVIEWS

After reading many other positive reviews on both the GWR and Miata forums I finally decided to buy this product. My main concern for many months was whether or not I was up to the task of installing the header. But with the excellent instructions on Brian's forum as well as several Miata forum threads it turned out easier than I expected. After receiving notice that the header would arrive on a Friday afternoon, I began the disassembly process. After about 3 hours I had the stock manifold out. Later that afternoon the new catted header arrived right on schedule. And it is a thing of beauty. I opted for the stainless version. Installation on Saturday morning took another 3 hours, although I could have shaved some time off of that but I was actually enjoying the process of double checking torque values and cleaning up my engine compartment. I already have the GWR catted midpipe, so that connection was a snap. I put everything back together, reconnected my battery, and went for a drive. NO CODES! Nice throaty sound with my RSII muffler, and a significant boost in power and low/mid torque. Another happy camper here. I since have added a M-E tune and I feel I have realized all of the gains that Brian has achieved on his 2012 project Miata. I've put several hundred miles on my Miata since the install with zero problems. This is the car that Mazda should have built all along. Thanks Brian.

-- Ron P.

Good morning Brian, I finally got a chance to put the exhaust on, great advice, it's just loud enough, solid product. I'm running without the baffles, sounds great in power band. Take care, you have all my future upgrade business.........regards.

-- John S.