PART NUMBER: 12529
The Sport/Race Clutch Disc for the 1983-92 RX-7 chassis (12A and 13B 6-Port Non-Turbo) is designed for road race and occasional drag race use. The disc features four (4) sintered copper pucks and a sprung hub for a quick, positive engagement. The quick engagement/ disengagement requires careful driver attention - this disc is not recommended for street use. This disc interchanges exactly with the stock disc and can be used with the stock pressure plate.
Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.