HEADER INSTALLATION LONG extension cord for second O2 Sensor - for use ONLY when installing header into Miata already using ROADSTERSPORT or PPE MIDPIPE.
2006-2015
PART NUMBER: 61-0098RD
READ REVIEWS (5) | WRITE A REVIEW
NOT AVAILABLE
DESCRIPTION
This is an option for the RoadsterSport header and Racing Beat Header and PPE LONG TUBE HEADER to allow relocation of your second factory O2 sensor to a position after the converter in a midpipe that so your installation is easy PLUG AND PLAY. Note that the plugs for each sensor are unique so that it is impossible to mix them. Extension cord uses thermal insulated wire and factory connectors and care should be take to make sure the connectors do not contact the hot header because while the wires are thermally protected the connectors can melt if left in contact with the header.NOT CARB APPROVED, CANNOT SHIP TO RESIDENTS OF CALIFORNIA.
CUSTOMERS WHO BOUGHT THIS ITEM ALSO BOUGHT
RoadsterSport NC ClubSport Coilovers
MIATA MX5-NC 2006-2015
Longest Available Travel Equals BEST Sport Touring SPRING Rate Setup with Ride QUALITY!
RoadsterSport NC ClubSport Coilovers
MIATA MX5-NC 2006-2015
Longest Available Travel Equals BEST Sport Touring SPRING Rate Setup with Ride QUALITY!
RoadsterSport Polyurethane Top Hat Bushings
MIATA MX5-NC 2006-2015
RoadsterSport Polyurethane Top Hat Bushings
MIATA MX5-NC 2006-2015
Bumpstop Packers for Koni Shocks 1/8" set of 8
MIATA MX5-NC 2006-2015
TEAM RECOMMENDATIONS
Customer Reviews
HEADER INSTALLATION LONG extension cord for second O2 Sensor - for use ONLY when installing header into Miata already using ROADSTERSPORT or PPE MIDPIPE.
Bought this a few months ago, and finally turned over 1500 miles since installation, so I can give a good review now.
My exhaust system consists of the Max Power header, this midpipe, the street single muffler, and the extra baffle for the muffler. I also used these O2 sensor extension cables. I installed all of these simultaneously.
I was an aircraft electrician for years, and I can say my cable was well made. I could have extended the cables myself, but the cost in time and aggravation would have far outweighed the reasonable price of this component. Once the cables were plugged in and secured, I fired up the car with no problems and no codes.
A must have when installing the Roadster Sport header, works great.
Excellent High Quality & Easy to Install! Highly Recommended
I bought both extension cords, simple install for relocating oxygen sensors. No code.
This made the install of the Maxpower header and mid-pipe plug and play. No check engine light.
Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)