Good-Win Racing Mazda Performance Parts

Swift Sport Springs SPEC-R

2010-2012 · MazdaSpeed3

Mazda3 2004-2018 · Suspension


Part Number: 61-1278

Year: 2010-2012

Application: MazdaSpeed3

Price: $419.00

Quantity:

Swift Sport Springs SPEC-R
rating (0 Ratings)
rating (0 Ratings)

Thank you. You have rated this product.

For motorsports minded individual with a passion in winning.

Spring Rate-
Front and Rear: 4.5kg/mm, 252 Lbs/Inch

Drop-
Front: -30mm/ -1.2 Inch
Rear: -28mm / -1.1 Inch

Swift made Sport Springs Spec-R is made for true track racing enthusiasts that wants to take their vehicle to the next level. Sport Springs Spec-R is engineered with 2 main characteristics.

1 Redesign lowering ride height to maximize the suspension performance allowing the vehicle to fully absorb road condition for maximum traction.

2 Increase in spring rate to further enhance cornering speed through entry and exit. The increase in spring rate is based on the vehicle factory stock valving settings. Sport Springs Spec-R is increase to the optimal rate that the stock shocks can handle. Higher performance shocks are not required, but recommended.

Spec R springs are wound with the same engineering as our sports springs. With the exception of stiffer rates and slight change in ride height; you can expect the same characteristics as our sports springs.

*** Product images may differ from actual product appearance ***

REVIEWS

I received the Roadstersport II, and I wanted to compliment you guys on an awesome product. The Miata should have these on from the factory. They make a great sound, that is not obnoxious at all. The exhaust also installed seamlessly!!! I will buy all of my Miata stuff from you in the future. Thanks,

-- Nate

After reading many other positive reviews on both the GWR and Miata forums I finally decided to buy this product. My main concern for many months was whether or not I was up to the task of installing the header. But with the excellent instructions on Brian's forum as well as several Miata forum threads it turned out easier than I expected. After receiving notice that the header would arrive on a Friday afternoon, I began the disassembly process. After about 3 hours I had the stock manifold out. Later that afternoon the new catted header arrived right on schedule. And it is a thing of beauty. I opted for the stainless version. Installation on Saturday morning took another 3 hours, although I could have shaved some time off of that but I was actually enjoying the process of double checking torque values and cleaning up my engine compartment. I already have the GWR catted midpipe, so that connection was a snap. I put everything back together, reconnected my battery, and went for a drive. NO CODES! Nice throaty sound with my RSII muffler, and a significant boost in power and low/mid torque. Another happy camper here. I since have added a M-E tune and I feel I have realized all of the gains that Brian has achieved on his 2012 project Miata. I've put several hundred miles on my Miata since the install with zero problems. This is the car that Mazda should have built all along. Thanks Brian.

-- Ron P.