Konig Hexaform 17x8 4x100 +45 Matte Bronze

DESCRIPTION

The Hexaform is a NEW 6-spoke design built with flow-forming technology. Available matte black or matte bronze. Konig integrated feedback from their motorsport teams, racers and drivers into the new Hexaform. The face was pushed out to allow for as much brake caliper protrusion as well as overall brake diameter near the drop center. This provides excellent caliper clearance for aftermarket big brake kits.

Wheels Specs:
*17x8
*4X100
*45mm offset
*73.1mm bore
*Weight ~17.2 pounds.

MX5/Fiat 124 Brake Clearance Notes:
YES, clears our 12.88" Big Brake Kits - both 4 and 6 piston
Requires 3mm spacer to clear our 4 and 6 piston caliper kits that fit on factory 11" rotor size
Factory Brembo caliper on our 12.75" Big Rotor Kit requires 5mm spacer
Does NOT clear factory Brembo Brakes on factory 11" rotor size
Does NOT clear StopTech BBK

Brian's APPLICATION NOTES: Flow formed for more strength than competitors in this weight class including an extra stout load rating of 700kg (1543 lbs) in this size! ONE CAUTION, it seems Konig is trying to play more like Enkei and included cast aluminum fancy center caps instead of industry standard cheap snap-on plastic caps. The result looks high end compared to plastic caps on wheels of similar cost but BE CAREFUL to do little more than finger tight with the very tiny allen head screws that attach the caps, use a dab of loctite, do NOT apply significant torque to the screws or they will strip out immediately!

WHAT IS FLOW FORMING?
Flow Forming Technology involves the application of pressure to the inner barrel of the wheel, while spinning & after it has been casted. This process shares similarities to that found in the forging process in which the aluminum molecules are compressed resulting in a lighter & stronger wheel with greater shock resistance & elongation properties.

Konig Hexaform 17x8 4x100 +45 Matte Bronze Pictures Below Courtesy Customer Alex Colmenares