Hard Dog M2 Sport Roll Bar

DESCRIPTION

This is our best selling Harddog Miata Rollbar!
The M2 Sport Bar features redesigned rear legs that allow room for the 1999+ Mazda glass rear window to fold down. The M2 Sport will also fit 1990-1997 cars. If your 90-97 car was retrofitted with a glass rear window soft top, the M2 model is what you want so that window can fold down. Also compatible will all flexible plastic rear window tops

Compatible with *most* after market glass rear windows out to about 34 inches of width. In measuring the width include the glass covered in the vinyl. If your glass is even wider than 34 inches, please contact us ahead of ordering as we can have Hard Dog make your bar with special wider rear legs to clear it.

One or two main hoop diagonal braces and/or harness attachment tabs may be added.

Features:
* Legal for SCCA Time Trials and NASA HPDE Events when equipped with at least one diagonal brace.
* Allows full seat travel and tilt**
* Full interior height and width; farther to the rear than the hard core allowing better head clearance
* Fits 1990 - 2005 Miata chassis
* Complete use of hard top and soft top
* Available with a durable black powdercoat finish. * Constructed of highest quality tubing 1.5" diam x .120" wall
* Laser cut 3/16" mounting and backup plates
* Complete hardware kit w/ grade 8 bolts and instructions

HARNESS OPTIONS:
This roll bar is NOT available with a harness bar. The reason for that is that the whole point of the M2 model is to clear a fold-down glass rear window, and a harness bar between the rear legs would interfere with that goal. To mount harnesses with an M2 bar, you have two options:
A) Select the option to add harness tabs to this bar. This adds a tab on each leg which has a mounting hole where you can bolt the harness should strap end to, or install an eye bolt for clip-in attachment of the shoulder straps.
B) Purchase separately the Hard Dog Bolt-In Harness Bar (available separately in the Hard Dog Roll Bar section on our site). That harness bar mounts to the Miata seat belt towers independently of the roll bar, and because it's positioned further forward than a harness bar would be if welded into the rear legs of the roll bar, this option will still clear a folding down glass rear window.

SHIPPING COST NOTICE: These drop ship direct from the Hard Dog Factory. Flat rate shipping shown at checkout applies within USA lower 48 states, not exports.

Picture below is M2 Sport with DOUBLE DIAGONALS:

Picture below is M2 Sport with NO DIAGONAL:

Picture below is M2 Sport with SINGLE DIAGONAL:

Picture below of optional welded harness tabs: