Enkei RPF1-RS 15x8 +28mm 4x100 Papaya F1 LIMITED EDITION

DESCRIPTION

ONE TIME PRODUCTION of the RPF1 in Papaya Orange to celebrate Enkei's returning to F1 in 2026 with McLaren Mastercard Formula 1 Team. These will not be made again and we are only getting a limited number of them. When they're gone, they're gone!
***PREORDER: ETA is late September or October 2026. Only a limited number are being made and this is only happening ONCE. We expect them to sell out before they arrive, so if you want them then don't wait, get your preorder in now.***

Price shown here is for ONE wheel but YOU MUST ORDER A MINIMUM OF FOUR. We will NOT accept orders for less than four wheels. Please order four at one time. If you order less than four, we will cancel your order.

BONUS: We will include an Enkei RPF1 T-Shirt with each set of 4 wheels! This extra bonus is offered by Goodwin Racing so that you can represent your love for the iconic RPF1 wheel even when you aren't driving!

Nothing beats this Enkei RPF1 Wheel for QUALITY, light weight and price. After many years of begging and pleading for RP-F1 in 15x8, Enkei finally made them.

Thanks to rolling rim production method that results in tight grain alignment (similar to forged product at much lower cost)... and the result is SUPER LIGHT yet STRONG with MADE IN JAPAN quality and precision that only our Enkei brand provides (our less expensive 15x8 choices will typically have variations of several ounces per rim to as much as half pound per wheel, these Enkei wheels typically no more than 1 ounce variation sample to sample because they are so much more precise, and less runout too).

Price includes special Enkei anodized aluminum valve stems! Does NOT include center caps, though Enkei tells us these are milled to accept the optional Enkei Center Caps we have available separately on our site (unlike the 15x7 version that will NOT accept those caps).

Takes a 75mm Hubcentric ring (unlike the 15x7 version that takes 73mm rings).
Amazing 11.3 pounds!

1990-2005 Miata Brake Clearance Notes:
- Clears all factory brakes
- Clears Wilwood 11" BBK
- Clears Stoptech 11" BBK
- Clears our old 11" Version 4 BBK
- Clears our 11.75" Version 5 BBK with 4 piston caliper. 6 piston caliper needs 5mm spacer.
- If you have another big brake kit, please contact us to confirm clearance.

BRIAN'S APPLICATION NOTES: We sent Enkei our Big Brake Template and with the 28mm offset these clear our big brake template! That does not mean they will clear everybody's big brakes, some of the other choices on the market use cheaper/shallower rotor hats. An NB with 1.5 negative camber or better typically needs no fender roll for 205/50/15 tire size. NA needs more camber or fender roll for same 205/50 tire size.