PART NUMBER: 15-101332COMBO
Rated for increased clamping pressure of 52% and will take the abuse of autocross and track days and low boost applications. Like our ACT HD, this clutch will also give you a slightly stiffer clutch pedal (about 20% stiffer).
But this EXEDY clutch gives a more stock-like release curve....very much like the factory clutch release curve! Kit comes complete with everything you need for installation including Pressure Plate, Clutch Disc, Throw Out Bearing, Pilot Bearing and Clutch Alignment Tool. Fits 6 Speed Only.
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel. 13 pounds!
BRIAN'S APPLICATION NOTES: The other guys will push a light flywheel on you under 10 pounds for any application. Though we have choices under 10 pounds for the racers out there, including the lightest NC setup available (our carbon/carbon setup with COMBINED weight of just 16 pounds for flywheel AND clutch), the average STREET Miata driver will likely NOT want it that light. Why? Because ultra light can result in quite a bit of Miata clutch and transmission CHATTER, particularly as your Miata transmission gets older and older. So, for our customers driving their Miata 90% of the time on the street or more, this is the FUN yet QUIET upgrade that won't annoy you with lots of chatter.
MIATA MX5-NC 2006-2015
MIATA MX5-NC 2006-2015
MIATA MX5-NC 2006-2015
Rocky is amazing!! Watched him alone install this setup in my car in two hours. Some chatter in reverse because of the lite flywheel and a tiny bit leaving in first gear but after 400 miles the forward slight chatter is gone. Some still in reverse though. 43,000 on the odometer at the time of the install. Clutch feel is not heavy and engagement is smooth and direct. Should last me a lifetime of driving. Stock clutches and release bearings do wear out and inflation is out of control(I wonder why?)..... so installing this kit now only seems right.
Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)