PART NUMBER: 20-1004
This kit both effectively minimizes chassis flex that reduces sway bar performance and eliminates possible cracking of the sway bar chassis mounts that results from repeated hard cornering. 90-04 (Except 90-95 w/PS) . Includes the blocks and bolts shown by small blue inset picture AND the white cross brace seen here which connects and boxes both the mounting points on both side of the car.
BRIAN'S APPLICATION NOTES: IF you want to install protection that you can forget see our product item 20-1021. These blocks and bolts are MUCH easier to install but need to be checked for tightness at least once a year.
Watch the Video by STR Racer Mike Heinitz. First video is WITHOUT protecting the mounts and the deflection under load is half an inch, which will eventually tears those mounts!
Now watch the second video by STR Racer Mike Heinitz and notice that with the blocks/bolts installed the flex is greatly reduced!
MIATA NA/NB 1999-2000
MIATA NA/NB 1990-2005
MIATA NA/NB 2001-2005
Simple straight forward instructions made for easy installation. Took me maybe 20-30 minutes from start to finish. Haven't been to the track yet with them but expect them to perform as advertised. No more worrying about ripping those stock mounts under hard driving. As I think Brian's notes stated, the nuts on the blocks should be checked periodically to ensure they are tight.
Another happy Good-Win customer!
Bought this brace in conjunction with tubular front sway bar. Installation instructions were very complete and brace was easy to install, as was the sway bar. I'm very happy with the resulting rigidity of the front end too. if you drive aggressively (autox or track) this should be a no brainer to buy and install.