Advanti Racing Storm S1 15x8 Matte Black

DESCRIPTION

Advanti Racing's new flow formed line of wheels are STRONG and LIGHT

The flow formed process results in a product that is stronger, including a 500kg load rating for a 15x8 that weighs just 11 pounds! Most everything else in this price range is gravity cast, pressure cast, or low pressure cast with heat treatment.

* 15x8 4x100
* +25 offset
* 11 lbs
* Flow Formed construction
* 73mm center bore
* Clear coated finish
* Cap included
* Valves not included
* Fits 205/50/15, 225/45 tires.
* JWL and TUV approved
* VIA 500kg certification

Takes optional 73/54mm hubcentric rings also available on this website.

1990-2005 Miata Brake Clearance Notes:
- Clears all factory brakes
- Clears Wilwood 11" BBK
- Clears Stoptech 11" BBK
- Clears our old 11" Version 4 BBK
- Clears our 11.75" Version 5 BBK
- If you have another big brake kit, please contact us to confirm clearance.

Tire Size breakdown:
-205/50 fits NB Miata fenders with 1.2 negative camber or better, NA Miata needs that camber and slightly rolled fenders.
-225/45/15 needs fender roll for all years at this offset. Always check clearance during install and after car is lowered to the ground, failure to do so can result in damage, death, tires cut on fender lips, and other bad stuff!

Fun autocross action shot of James Glaser driving his Miata, picture courtesy GetFaster Racing photography (https://getfaster.smugmug.com/)

ABOUT ADVANTI RACING: Advanti Racing wheels was established in the mid 1990s. Their racing experience includes supplier and sponsor of the Formula One Scuderia Toro Rosso team, among others, and that experience is reflected in the quality wheels they produce. Each wheel is designed and engineered in-house by YHI Manufacturing to the highest quality and testing standards, including JWL, JWL-T, VIA and TUV.

Note we STRONGLY recommend our numerous upgraded lug choices with any of our new wheels, stock lugs too short and fat and will scratch these wheels. Unlike the short and fat stock lugs that will result in scratching new wheels, all our replacement lugs have the socket tool bottom on the lug rather than the wheel surface, and are longer for more engagement with stud surface so they also stay tighter.