Thank you. You have rated this product.
Low pressure cast - Flow Formed outer rim - Monoblock construction
T6 heat treated
73.1mm center bore
Double valve design
Painted, clear coated finish
Valves not included.
*Always test wheel for adequate clearance to fenders, chassis and suspension components before using these wheels. Failure to do so could result in vehicle damage, loss of control, injury or death. Wheels can not be returned once tires have been mounted.
YES, fits over our 12.88" Wilwood big brake kits and our RX-8 rear brake upgrades.
TEST FITMENT before you drive it, you can get 255/40 on these wheels in rolled fenders if camber setting is low and it will clear inside just barely (and this will depend in part on the tire choice). But if camber setting is high like it is on our Autocross toy below we needed at least 3mm spacers all four corners to clear inside and it still cleared rolled fender lips to the outside. Consider our long ARP wheel studs with any spacer and race use. Our NC needed 3mm spacer to fit this combo with 255/40/17 tires, we do offer the spacers here on this site.
Showed up to first two events of the season with this setup and dominated, including TOP TIME OF DAY! The power of 10 inches!