PART NUMBER: 61-1649
READ REVIEWS (2) | WRITE A REVIEW
OUT OF STOCK
*17x8
*4x100
*ET45
*~16.8lbs
Takes a 73mm hubcentric ring also available on this site. The flow formed process results in a product that is stronger/lighter than lesser casting methods. Most everything else in this price range is gravity cast, pressure cast, or low pressure cast with heat treatment.
Brake Fitment:
Fits over all of our Wilwood big brake kits.
Requires a 3mm spacer to fit over our Wilwood 4 and 6 piston caliper upgrades on factory rotor size.
Sorry, does not fit the Club model Brembos.
ABOUT ADVANTI RACING: Advanti Racing wheels was established in the mid 1990s. Their racing experience includes supplier and sponsor of the Formula One Scuderia Toro Rosso team, among others, and that experience is reflected in the quality wheels they produce. Each wheel is designed and engineered in-house by YHI Manufacturing to the highest quality and testing standards, including JWL, JWL-T, VIA and TUV.
Flow Formed Production Technique results in stronger and more dense final product with less weight than lesser casting methods.
Note we recommend our numerous lug choices with any of our new wheels, stock lugs are too short and fat. Unlike the short and fat stock lugs that will result in scratching new wheels, all our replacement lugs have the socket tool bottom on the lug rather than the wheel surface and are longer for more engagement with stud surface, so they also stay tighter.
Great for 205mm, 215mm and 225mm tires. Even 235/40 size tire fits nicely without rolling fenders but may rub plastic fender liner at full lock depending on how much car is lowered, amount of negative camber, and tire choice.
ND TPMS Note:
In the USA, the 2016-2017 ND Miata uses NO in-wheel sensors for tire pressure. 2018+ ND Miatas do use physical tire pressure sensors. The new in-wheel sensors do not fit Advanti Storm wheels. Customers will want to pick an aftermarket sensor for that wheel for 2018 and newer, or just use regular valve stems with no sensors if you don't mind the light on the dash.
Advanti Racing Storm S1 17X8 4X100 ET45 Matte Black and RoadsterSport Springs! Tires are 215/45R17 PS4S. Picture Courtesy Customer Dmitry Antipov *17x8 *4x100 *ET45 *~16.8lbs
MIATA MX5-ND 2016-2024
MIATA MX5-ND 2016-2024
MIATA MX5-ND 2016-2024
Wheels look great, stock lug nuts are a bit fat thus making install a tight fit. Recommend at least 215 width tires unless going for a "stanced" look. I used stock 205 Potenzas which are a bit too stretched for my taste. Lines up flush with front fender, rears could use another 10mm in my opinion.
Definitely a little tougher install than usual but with some patience it's very possible at home
Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)