PART NUMBER: 61-1950
OUT OF STOCK
What you get:
- Lightweight aluminum brackets to hold the battery securely in the factory location
- Stainless steel battery cable adapter
- Hardware included
Below is STOCK battery and all hardware that are removed, total 26.7 pounds.
Below is what you add back, total 3.35 pounds, weight savings 23.4 pounds!
- The battery this kit is designed for ships with adhesive-backed foam padding in various thicknesses. Apply the 1/4" thick pads to the battery brackets in five locations; on the two vertical ears on the main base plate, and on the two sides and the top of the straps that hold the battery in place.
- To install the cable adapter on the positive terminal, first unbolt the round battery post connector from the fuse junction on the positive cable and then replace that post connector with the supplied stainless steel adapter using the included 8mm hardware. The adapter attaches the cable to the battery at an angle so that the standard cable length does not need to be changed. See photo at the top of this page for reference. To fit the plastic post cover over the positive terminal again, just trim the side of the cover with a razor blade to clear. The negative cable can be bolted right to the battery without any changes. Again, see photo for reference.
Brian's Extra Notes: So far we have had zero issues with the 360 CCA battery choice used in our ND, but it is very interesting to note that Battery Tender offers a 'bigger' 480 CCA that is in the same size case, the BTL35A480C. Weight climbs from 2.6 for the battery to 3.75 but for those needing more extreme duty an interesting additional choice that works exactly the same in our bracket setup! Note Battery Tender makes a special little charger for these LiPo batteries because an old standard lead acid charger can wreck these lithium batteries. Numerous other choices will fit, bracket takes batteries such as AntiGravity YTX12-24, EarthX LTX900 and LTX1200 (the last two are TALLER and need spacer and/or longer bolts not included with bracket but worth the trouble for those seeking even more power...600 CCA for the LTX1200). Research the specs of these so you can pick the choice right for your use.
Just finished the install. It's relatively straightforward and you will reuse some of the hardware. This and the Mishimoto Washer Reservoir will save you a combined 30lbs. Just make sure you get a big enough battery. I got a 480cca battery from AntiGrav. But be prepared to spend $200-$600 on a battery.
This GWR Ultralight battery mounting kit worked fantastically!
Very easy to install overall!
I had mine powdercoated satin black and added thin stick-on black insulating mat to keep the battery protected and tight.
I used an AntiGravity ATX12-24 (same as YTX12-24) which is 5lbs and 720cca. Get the post adapters for easy installation.
(doesn't look like I can attach pics here)
I was a little skeptical of this product from the description on the page, but when I put it together, it was astonishingly sturdy. The bent legs required some more bending to fit, but nothing a few seconds in the bench vice couldn't fix. Once it was all together, I was really pleased with the quality of this thing.