PART NUMBER: 61-3056
Motorsports oriented Flow Formed wheel for great strength and weight.
- +20mm offset
- 76.1mm hub bore
- 16.6 lbs
- No center cap
- Valves and lugs not included
Extreme 15x11 size is intended for RACE use with 275/35/15 tire, available in Hoosier race tires as well as the Nankang AR-1. If you have at least 300hp, this might be the right wheel for you. Otherwise, have a look at our narrower choices that are much easier to fit.
Folks considering fitting this massive size to their Miata should be comfortable with the "do whatever it takes" approach required to make these clear the fenders and chassis. Please do not call us and ask what needs to be done. Put them on the car and adjust things until they fit. Expect to need fender flares as well as "massaging" the inner wheel tub to make room, at a minimum. You may choose to use a little bit of wheel spacer to improve inboard clearance (+20 offset was chosen to err on the inboard side because it's much easier to add a little bit of spacer to reduce offset and get the wheel placement perfect for your car and nearby components rather than to have to machine the wheel pad down to increase offset). The plastic fender liners will be discarded.
Always test wheel/tire for adequate clearance to fenders, chassis and suspension components before using these wheels. Failure to do so could result in vehicle damage, loss of control, injury or death.