StopTech BIG BRAKE KIT with Floating Rotors - RACE

DESCRIPTION

NEW 11" Big Brake Kit by Stoptech for the 94-05 Miata. This RACE version of the kit comes with the race floating hardware for the rotors that allows maximum float, StopTech's SR33 race pad compound, and has StopTech ST42 calipers with piston sizes specifically chosen to balance with either the StopTech STR21 Rear Race kit, or the Miata's 1.8L SPORT rear brake size.

Kit include necessary brackets, hardware and brake lines to complete installation.

*** The front calipers in this kit use the DR22 pad shape. Type "DR22" into the search box on the upper left of our site to see all our pad options for this caliper.***

Caliper - Forged/Anodized ST42 with 36/38mm pistons

StopTech 2-piece calipers have the lowest amount of flex and deflection among 25 of the leading caliper models (including some monoblocks) from well-known manufacturers. This is accomplished using the StopTech patented bolt-in bridge, which is strong enough to stop distortion without sacrificing cooling through the top of the caliper.

Rotors - 11" Slotted 2-piece Floating Rotors

StopTech Pillar Vane Brake Rotors are engineered to provide superior strength while reducing rotor weight and running cooler. The diamond shaped pillars provide brake pad surface stability as well as reduced rotating weight over rotors of similar strength. Airflow is also improved over straight vane rotors, allowing quick heat dissipation that results in greatly reduced fade.

Note: Picture shows rotors with straight slots, but we typically spec this kit with a bi-slot pattern (unidirectional).

Floating Rotors: High grip cars have the ability to generate enough lateral grip to flex the knuckle or upright. As the upright flexes, the rotor pushes the piston back into the caliper. The next time the brakes are applied, extra pedal travel is needed to compensate for the piston, "knockback". The floating rotor will "take up" some of that knockback, reducing the effect. This kit is first and foremost a track-focused high performance BBK, and in our testing the floating rotor is a crucial part of this brake system. HOWEVER, please note that floating rotors can produce some "clicking" and other noises during street use.

Installation note: The floating rotors ship pre-assembled. When you remove the rotors from the packaging, you will notice the rotor appears to be loose and can move independently from the mounting hat. The hardware is not loose, this is normal. Do not attempt to over-tighten the hardware that fastens the hat to the rotor.

Pads

Kit ships with StopTech SR33 compound pads. These are a race pad with medium friction, high fade resistance, and excellent modulation. Pairs well with SR333 pads in the rear, or Porterfield R4 pads in the rear.

Please note this kit is ASSEMBLED TO ORDER by StopTech. Please allow 6-8 weeks for order processing.

StopTech's BBK with floating rotors was used on the HyperMiata to set the production car lap record at Chuckwalla Valley Raceway!

Please note, the below photo shows the billet version of this kit which costs a bit more