PART NUMBER: 60-1003
All Racing Beat sway bars are finished with a distinctive, red powder coating, which provides a smooth, glossy protective layer. You can be assured of many years of superior handling performance with these proven bars!
This sway bar is supplied with replacement urethane bushings, retaining clamp, Prothane grease, and detailed installation instructions.
Bar Sizes Stock " 23mm Front, 19mm Rear Racing Beat " 28.5mm (1.125 ) Front, 27mm (1.0625 ) Rear (Both bars use solid tubing.) All 2002-2008 4-Cylinder Models and 2002-05 V6 Models (Excludes 2006-08 3.0 V6 models)
what a difference did it make, i love it, i can take the same corners faster with more control because the car sways less and it feels ''tighter'' up front and that feels good hahah,its become one of my top favorite intsalls on my car, i installed it on my driveway on jack stands, i got to every bolt from the bottom , i didn't even remove my tires,once you remove the sway link bolts, you have to remove the easily accessable rack and pinion bolts so you can get to the sway bar bracket bolts with a swivel socket or u joint socket or deep socket also you can get to them , you have to drop the subframe a bit so the bar slides behind between subframe and actual body of car, i just ordered awr adjustable sway links for front and rear,also the mazda 6 is G platform and FORD uses this platform as the CD3 platform, its the same thing under car , i had my car and a fusion up in the air and the whole under car was almost identical so you can buy parts from another make and model car and put it in yours , i had to go to a ford performance website to find the awr sway links , but since its the same platform the suspension setup is the same